Side Case Kit

SKU SC-1
$34.99
Out of stock
1
Product Details

Allows you to mount a pair of our Photon Booster LED modules (available separately) to the back, side or front of your bike's side cases or top case.

While the kit is designed for our own Photon Booster LED module, you can use it to power anything up to the 2 amp limit of each connector.

The kit includes 2 each quick-release, waterproof connectors, waterproof through-hole wire grommets, and die-cut 3M double-sided tape bonding seals for our Photon Booster LED modules. It also includes 4 Posi-lock inline connectors and 8 adhesive backed zip tie anchors


WHAT IS INCLUDED

The kit includes 2 each quick-release, waterproof connectors, waterproof through-hole wire grommets, and die-cut 3M double-sided tape bonding seals for our Photon Booster LED modules. It also includes 4 Posi-lock inline connectors and 8 adhesive backed zip tie anchors, plus full instructions - even a drill template for our Photon Boosters.


TECH SPECS

The kit is designed for our own Photon Booster LED module, but you can use it to power anything up to the 2 amp limit of each connector.

It requires two 7/32" holes in the rear or side of the case. The LED module is held in place by the tape and the center-mounted 4mm diameter bolt. The side case may have a wall thickness of up to 0.2". (Note: check the thickness of your case walls - the thickness of some double-walled side cases is more than 0.2".


Save this product for later