IQ-275-Alert Intelligent Dimmer

SKU IQ-275-A
$89.99
In stock
1
Product Details

The IQ-275-Alert Programmable Dimmer adds the capability to initiate a brief flashing sequence to the IQ-275 features.

The unique ALERT! feature on the IQ-275-A enables you to initiate a brief, highly conspicuous flashing sequence when you really need to be noticed by traffic ahead.

Just tap your high beam switch twice within one second, and the controller rapidly modulates the brightness of the lamps attached to the controller. No matter what brightness you have the lamps set to, even if they're off, they will immediately flash at maximum brightness in a very conspicuous sequence. The sequence takes less than two seconds, but will greatly improve your likelihood of being seen.

Normal application of the high beam or a single tap will not trigger the ALERT! sequence, so it has no effect on your usual riding style.


WHAT IS INCLUDED?

IQ-275-A controller - 1

Adhesive velcro squares - 2

Posi-Tap® connectors - 3

Posi-Twist® connector - 4

Installation manual - 1


TECH SPECS

  • Controller Input voltage: 12 - 16 Vdc
  • Controller current draw (red wire): 15 milliamps
  • Maximum lamp power: 144 watts (12 amps) each channel, 288 watts (24 amps) if both channels are connected in parallel
  • Maximum lamp operating voltage: 48 V
  • Programmable brightness range: 0 – 100% in 10% subjective brightness increments
  • Default brightness levels:
    • Yellow wire connected to ground: 10%
    • Yellow wire not connected: 20%
    • Yellow wire connected to +12 V: 50%
  • Dimensions: L: 1.75" W: 1.31" H: 0.5"
  • Weight: 2 oz.
Save this product for later