Convert your stock front turn signals to bright marker lights. If the turn signals are LEDs, they will also inherit our patented conspicuity flicker! The Photon Blaster “TS” systems can be wired to our LED modules and the stock turn signals. You can also use a standalone IQ-250-TS controller to convert your stock turn signals without adding our LEDs. Installation instructions and a wiring diagram are in our Photon Blaster support section.
On the rear you can convert your stock tail/brake lights to a flashing brake light and if the lights are LEDs they will also inherit our patented conspicuity flicker! Our base P3 rear systems can be wired to our LED modules and the stock tail/brake lights. You can also use a standalone IQ-260 controller to convert your stock tail/brake lights without adding our LEDs. Installation instructions and a wiring diagram are in our P3 support section.
You can even convert the stock top case light in BMW K1600GT and R1200RT model to a combined tail light/flashing brake light with our base P3 system or a standalone IQ-260 controller. Installation instructions are in our BMW K1600GT and R1200RT support sections.
Note: when converting stock lights a load resistor may be needed to prevent lamp-out and fast-flash errors.